Just bought spooky2!!!!

Hey Robby,

I've made progress using Spooky2, the herxes from Rife can be rough but if you push through them you do get symptom improvements over time.

This guy actually achieved remission using Spooky:

www.stickerbowandtherose.com/2014/10/my-success-story-lyme-naturals-and-rife.html

The Spooky software does look intimidating at first, because it allows for so many different options. But it's not necessary to dive into all the features right away. It's fairly simple to just run the pre-programmed frequency sets.

One thing is that I'd recommend using either the handheld contacts or the plasma (depending on which one you bought) for killing microbes. The remote mode is fairly unproven for killing treatments at this point.

Someone made a tutorial video that might help you with getting started:
/www.youtube.com/watch?v=_f4lXJ6jbdc

Robby please read this about herxing.

www.tiredoflyme.com/the-herxheimer-reaction.html

Do not "overdo" or push beyond your body's limit. Herxing can be very detrimental to your health.

for sure I'm not going off ABX........... They are my best friends.

Hi Robby,

The newer versions of the software by default start up in a kind of beginner mode that hides all the advanced options. If you click the Customize checkbox to the right of the Search field you should see the full view.

If you run these sets for Borrelia:

Borrelia Burgdorferi Lyme CUST
Borrelia Spp. Cysts CUST

and these for Bart:

Bartonella Lyme CUST
Bartonella Quintana XTRA

you'd cover most of the best frequencies for them. One thing is that it's best to start with low run times (a few minutes) at first until you know how much you'll herx. You can change this by using the setting Dwell Multiplier setting to be .25 for 25% of the program time or whatever.

Once you've added a program and clicked on the generator, it'll show the total run time in that box. If you click on the ~ button it will allow you to change settings like dwell for that program.

I'm assuming you have the handheld contact cylinders? Some of the frequencies are more noticeable than others. You should feel some kind of tingling when its running.

Post Edited (project) : 7/6/2016 2:56:07 PM (GMT-6)

My friend I will ask for your help again. I understood the software by now... after watching some videos. My question is about the box it self. Apparently I only make the machine really works when i play around with the settings in the box not in the computer. Are they apart from each other? I could not find any video teaching about it. Obs: I used the rife for over 1 hour let's see what happens.

project said...
If you run these sets for Borrelia:

Borrelia Burgdorferi Lyme CUST
Borrelia Spp. Cysts CUST

and these for Bart:

Bartonella Lyme CUST
Bartonella Quintana XTRA

you'd cover most of the best frequencies for them. One thing is that it's best to start with low run times (a few minutes) at first until you know how much you'll herx. You can change this by using the setting Dwell Multiplier setting to be .25 for 25% of the program time or whatever.

Once you've added a program and clicked on the generator, it'll show the total run time in that box. If you click on the ~ button it will allow you to change settings like dwell for that program.

I'm assuming you have the handheld contact cylinders? Some of the frequencies are more noticeable than others. You should feel some kind of tingling when its running.

Robby - I'm not 100% sure what's wrong in your case. The generator should be plugged into the USB port of your computer. If the Spooky software detects it properly during startup you should get a message saying something like 'Frequency Generator detected, search for more?'. If you see a message like 'No generator found, running in test mode' then you know there is likely a problem with the USB connection to the generator.

Blue - I just tried running the proto frequencies with a 3.3 mhz carrier and the tube doesn't seem to light consistently above 3.0 mhz . Not sure why this is as on the Spooky forums I read a couple reports of people getting them to light all the way up to 4.0 mhz.

It might be something to do with interference. I recently ordered some of the BNC magnetic filters to try to minimize the effects from this. If you're not using them (magnetic donut wound with the cable), that might potentially be why. Otherwise there might be variability in the tubes. You can always try using 2.1 mhz carrier as that is the lowest carrier setting the MOPA uses (up to 3.8mhz). I don't think there is anything magical about 3.3 mhz in particular. Just piggybacking the killing frequency on a mhz level carrier might have some different effect.

So the generator has a few buttons and a knob on it so you can manually enter frequencies onto it directly. I'm not sure if anyone actually uses it that way but it's possible to do so. The Spooky software eliminates the need to manually program the generator that way.

I have no knowledge about spooky2 - but I just wanted to say how great it is we have this forum.

It's wonderful that robby can get such great help from others using the spooky.
Project - thanks for sharing what you know...it's much appreciated!

Wish there were places that leased this type of equipment, or even some local Lyme groups. Since its non-FDA, I suppose insurance might make leasing to risky.

I know its ilegale for Drs to use it on patients in some states. But chiros use all kinds of smaller electrical devices, which I bet many are non-FDA as well.

You two let us know about any improvments.

Is it like rife, where it works on many pathogens? even micoplasma?

Their confusing web site has much higher priced stuff than the $170 you mention.

Wow, you get results from $170 spent, less than a LLMD appt. I will review this some more. I like that it can be a diagnostic tool, so many LLMDs just use the shotgun theory with different ABX - a guessing game.

Post Edited (astroman) : 7/8/2016 6:31:16 PM (GMT-6)